Draft Rectangle/sv

Ellipse

Polygon

Draft

Description

The corners of a Draft Rectangle can be filleted (rounded) or chamfered by changing its DataFillet Radius or DataChamfer Size respectively. It is also possible to subdivide a Draft Rectangle by changing its DataColumns and/or DataRows property.

Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 1.0).

• To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
• Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first point, else they are relative to the coordinate system origin.
• Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system.
• Press F or click the Filled checkbox to toggle filled mode. If filled mode is on, the created rectangle will have DataMake Face set to true and will have a filled face.
• Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating rectangles.
• Press S to switch Draft snapping on or off.
• Press Esc or the Close button to abort the command.

Notes

• A Draft Rectangle can be edited with the Draft Edit command.

Preferences

See also: Preferences Editor and Draft Preferences.

• If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part Plane instead of a Draft Rectangle.

Properties

See also: Property editor.

A Draft Rectangle object is derived from a Part Part2DObject and inherits all its properties. It also has the following additional properties:

Data

Draft

• DataArea (Area): (read-only) specifies the area of the face of the rectangle. The value will be 0.0 if DataMake Face if false.
• DataChamfer Size (Length): specifies the length of the chamfers at the corners of the rectangle.
• DataColumns (Integer): specifies the number of equal-sized columns in which the rectangle is divided.
• DataFillet Radius (Length): specifies the radius of the fillets at the corners of the rectangle.
• DataHeight (Distance): specifies the height of the rectangle.
• DataLength (Distance): specifies the length of the rectangle.
• DataMake Face (Bool): specifies if the rectangle makes a face or not. If it is true a face is created, otherwise only the perimeter is considered part of the object.
• DataRows (Integer): specifies the number of equal-sized rows in which the rectangle is divided.

View

Draft

• VyPattern (Enumeration): specifies the Draft Pattern with which to fill the face of the rectangle. This property only works if DataMake Face is true and if VyDisplay Mode is Flat Lines.
• VyPattern Size (Float): specifies the size of the Draft Pattern.
• VyTexture Image (File): specifies the path of the image file to be mapped onto the face of the rectangle. Blanking this property will remove the image. The rectangle should have the same proportions as the image to avoid distortions.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a Draft Rectangle use the make_rectangle method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeRectangle method.

rectangle = make_rectangle(length, height, placement=None, face=None, support=None)

• Creates a rectangle object with length in the X direction and height in the Y direction, with units in millimeters.
• If placement is None the rectangle is created at the origin and the length will be parallel to the X axis.
• If face is True, the rectangle will make a face, that is, it will appear filled.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

rectangle1 = Draft.make_rectangle(4000, 1000)
rectangle2 = Draft.make_rectangle(1000, 4000)

zaxis = App.Vector(0, 0, 1)
p3 = App.Vector(1000, 1000, 0)
place3 = App.Placement(p3, App.Rotation(zaxis, 45))

rectangle3 = Draft.make_rectangle(3500, 250, placement=place3)

doc.recompute()

Ellipse

Polygon

Draft

Draft

• Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
• Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
• Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view

---

• Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
• Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid

---

• Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
• Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
• Context menu:
  • Layer container: Merge layer duplicates, Add new layer
  • Layer: Activate this layer, Select layer contents
  • Text: Open hyperlinks
  • Wire: Flatten
  • Working plane proxy: Write camera position, Write objects state

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub